The B-SERIES inks are designed as a replacement bags for the Brother GT3 DTG garment printers. These 380cc bags drop into the existing GT3 carts. Save 35% over OEM white and almost 50% on CMYK ink costs – this allows you to print more and put those savings into your pocket!

  • This ink is NOT manufactured by Brother
  • 380 mL replacement bags
  • Bright, vibrant colors
  • Recommended use with the Image Armor line of pretreatments
  • DO NOT MIX OEM inks and Image Armor B-SERIES inks – a complete changeover of inks must be done at the same time.

Instructions for Curing Image Armor Ink

Cure the Image Armor Inks at 356F for 35 seconds. You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature. Since heat presses vary you may need to adjust and test wash your print.

Use light to medium pressure on the heat press to cure the ink.

Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.

Changing to Image Armor Ink

If you currently have empty Brother carts lying around – save them! Our website has information on how to safely open and replace the empty bag. These carts can be re-used over and over. The bags must be inserted correctly according to our instructions to avoid misreading of the ink level meters.

Your cart is empty

Select Currency

{CC} - {CN}